Door sections are formed from heavy, 25-gauge galvanized draw quality steel

Section joints are roll-formed into a tongue-and-groove design which produces a superior weather seal

Inside stiles are made of galvanized steel and stile holes are "dimpled" for increased holding power

Bottom weather seal utilizes an aluminum retainer and extruded virgin vinyl

Extension or torsion springs are individually computer-calibrated to lift your door

Extra-heavy paint system consists of .25 mil. primer with rust inhibitor and a .75 mil. coating of baked-on polyester paint in your choice of white, almond, sandstone, or brown

Hinges are stamped from galvanized steel in a "wide body" pattern for greater stability and longer life

Models 2251/4251 include 1-3/8" polystyrene insulation with a vinyl back cover

Models 2255/4255 include 9/16" polystyrene insulation with a vinyl back cover

Models 2251/4251 R-value - 6.85

Models 2255/4255 R-value - 3.29

Download Literature

Door sections are formed from heavy, 24-gauge galvanized draw quality steel

Section joints are roll-formed into a tongue-and-groove design which produces a superior weather seal

Bottom weather seal utilizes an aluminum retainer and extruded virgin vinyl

Long-lasting rollers assure consistent, quiet and efficient operation

Inside stiles are made of galvanized steel and stile holes are "dimpled" for increased holding power

Extension or torsion springs are individually computer-calibrated to lift your door

Extra-heavy paint system consists of .25 mil. primer with rust inhibitor and a .75 mil. coating of baked-on polyester paint in your choice of white, almond, sandstone, or brown

Hinges are stamped from galvanized steel in a "wide body" pattern for greater stability and longer life

Optional automatic latching lock system opens easily from inside or outside

Models 2241/4241 include 1-3/8" polystyrene insulation with a vinyl back cover

Models 2241/4241 R-value - 6.85

Download Literature

Section joints are roll-formed into a tongue-and-groove design which produces a superior weather seal

Long-lasting durable rollers assure consistent, efficient operation

Heavy-duty 14-gauge hinges with "wide body" pattern for greater stability and longer life

Extension or torsion springs are individually computer-calibrated to lift your door

Extra-heavy paint system includes .25 mil. primer with rust inhibitor and a .75 mil. coating of baked-on polyester paint in your choice of white, almond, sandstone, brown, bronze, silver, or evergreen

Concealed steel plates run continuously from top to bottom of each section for fastening hardware

White, powder-coated hardware is available as an option

White painted end stiles

Bottom weather seal utilizes an aluminum retainer and extruded virgin vinyl

Optional automatic latching lock system opens easily from inside or outside

Double sided steel doors are 2" thick

Raised panel R-value - 8.07

Flush panel R-value - 8.72

Download Literature

Door sections are formed from 26-gauge exterior and 27-gauge interior galvanized draw quality steel

High-density polyurethane injected core

Long-lasting durable rollers assure consistent, efficient operation

Heavy-duty 14-gauge hinges with "wide body" pattern for greater stability and longer life

Extra-heavy paint system includes .25 mil. primer with rust inhibitor and a .75 coating of baked-on polyester paint in white, almond, sandstone, brown, bronze, or evergreen

Concealed steel plates run continuously from top to bottom of each section for fastening hardware

Optional white, powder-coated hardware

White painted end stiles

Thermally-broken for optimum weather protection

Bottom weather seal utilizes an aluminum retainer and extruded virgin vinyl

A continuous weather seal at the section joint assures maximum protection from the elements

Models 2216/4216 R-value - 14

Models 2217 R-value - 14.3

Download Literature

Models 5250/5251 offer the durability of tough 25-gauge draw quality steel in a pan-type product

Extra-heavy paint system includes .25 mil. primer with rust inhibitor and a .75 coating of baked-on polyester paint. Available in white, almond and sandstone

Heavy-duty 16-gauge hinges with “wide body” pattern for greater stability and longer life

Long-lasting durable rollers assure consistent, efficient operation

Extension or torsion springs are individually computer-calibrated to lift your door

Standard decorative hardware is available for all doors as well as optional Wrought Iron designs to replicate an old world look

Exterior decorative hardware includes 4 hinges, 2 handles and pop rivets for mounting to face

Glazing options include plain glass and glue chip glass with five optional insert designs

Inside stiles are made of galvanized steel and stile holes are “dimpled” for increased holding power

Model 5251 includes 1-3/8” polystyrene insulation, with a vinyl back cover

Patented design

Model 5251 R-value - 6.85

Download Literature

Deluxe Wall Station Standard

Three Button MCT-3 Remote Control Standard

Open/Close/Park Door in either direction Standard

Rustproof rolled steel T-rail construction Standard

Automatic Courtesy Light Standard

Warranty: Lifetime on Motor; 5 years on Mechanical; 1 year on Electronics

Download Literature

More information on residential operators available on Manufacture's Website.

2” thick sections constructed of pre-finished galvanized steel

Insulated models feature either heavy duty vinyl or 27 gauge steel backers

3250/51/52 doors utilize steel that meets the nominal 24 ga. designation used by some door manufacturers

Box shaped stiles are riveted to the face of the section and are galvanized for additional corrosion protection

Tongue and groove meeting rails provide superior rail strength and weather resistance

Glass is available in 1/8" DSB, 1/8" Lexan, Insulated or 1/4" tempered glass

Glass is easily replaced or substituted by removing molded frames

Exhaust port is optional for bottom section

Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements

Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers

Bottom U-shaped astragal in an aluminum retainer is standard

Increased wind-load requirements may be specified

All models are available in finishing coat of white. Additional sandstone, brown and silver finishes are available in models 3240/41/42 ONLY

Insulated Door R-Value: 6.81

Download Literature

Model 3216 Polyurethane Thermal Door R-Value: 14.3

Foamed-in-place polyurethane core permanently bonds the 26 gauge face and back steel to form a rigid homogeneous section

2” thick sections are thermally broken to eliminate convection

Tongue and groove meeting rails with joint gasketing provide superior joint strength and prevent air infiltration

Concealed hinge attachment plates run the full height of sections for superior strength

Rigid exterior end stiles are finish painted white

Glass is available in 7/16” insulated or 1/4” tempered glass

Glass is easily replaced or substituted by removing molded frames

Exhaust port is optional for bottom section

Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.

Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers

Bottom U-shaped astragal is standard

Increased wind-load requirements may be specified

Available in finish coat colors of white, brown, sandstone and almond

Download Literature

Medium-Duty Logic trolley operator for standard lift sectional doors.

Powerful 1/2 HP, single phase motor with instant reverse and internal automatic reset thermal overload.

Auxiliary Reversal System: Designed to protect the door and door operator from damage.

Rail Assembly: High strength dual L-rail track with exclusive nylon quiet gliding chain guides on rail spacers for quiet, smooth operation.

Emergency Disconnect: Spring-loaded disconnect for emergency manual operation.

Push Button Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators. Controls are available.

Friction Clutch: Adjustable friction clutch helps protect against damage to the door and operator should the door meet an obstruction.

Warranty: 2-year warranty.

Download Literature

Industrial-duty trolley operator for standard lift section doors.

Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/2 or 3/4 HP

Rail Assembly: High-strength dual L-rail track with nylon quiet-gliding chain guides on rail spacers for quiet, smooth operation.

Emergency Disconnect: Spring-loaded for emergency manual operation.

Push Button Station: 3-button station comes standard and has OPEN/CLOSE/STOP functionality.

Friction Clutch: Adjustable, helps protect against major damage to door and operator should the door meet an obstruction.

Bearings: Ball bearings on output shaft; heavy-duty, oil-filled bushings on reduction shafts.

Brake: Solenoid-actuated brake is standard on 3/4 unit to prevent coasting of door.

Warranty: 2-year warranty.

Download Literature